G920/G29磁性位移器支架

G920/G29 Magnetic Shifter Mount

2024-04-17 07:18:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this to fit the magnets I had on hand and to fix some of the tolerancing issues I found with other similar designs out there. I have gotten to test this on my personal g920 but have not physically put this on a g29 but it should work just fine.

The Magnets i used are 10mm in diameter and 4mm in thickness. The magnets are designed to stick out of the print by approximately 2mm so that you get a nice firm clicking from them.

I use all 6 available magnet holes on mine but you can reduce the amount of magnets you use if you wish to tune back the force required to actuate your paddle shifters.

to assemble this you will need to disassemble your wheel as this is a press fit onto the back of the housing.

I will be adding more photos of the physical print and how to assemble shortly

If you want any modifications to the part or have something else you want made reach out to me via my fiverr profile https://www.fiverr.com/ethandavis149