一起飞RC - 旋翼狂欢 - TanQ-S - 三维打印

Let's Fly RC - Rotor Riot - TanQ-S - 3d Prints

2024-04-17 10:22:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

TanQ - S is a sub250, 4k capable, "5inch performance" in a 3.5" footprint - bando bashing drone.

Here are the parts that are new

A lot of the parts are universal to the TanQ2 and TanQ1, such as the Antenna mounts and Camera mounts, and those parts are not included in this listing.

The FPV camera mounting slot is the same as the TanQ2, so you can use those camera mounts with the TanQ-S

The rear end of the TanQ-S has the same 20mm standoff spacing, so the fpv antenna mounts can be used from the TanQ1 and TanQ2

The top to bottom stack height is 20mm, the same as the TanQ1

Standards

Overview and Background

TanQ-S Drone Frame

Lesson Plan and Activity

Not sure what to put in this box

Tags

multirotor rotor riot tanq

License

CC BY

Let's Fly RC - Rotor Riot - TanQ-S - 3d Prints
by LetsFlyRC is licensed under the Creative Commons - Attribution license.

一起飞RC - 旋翼狂欢 - TanQ-S - 三维打印

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

宝马N55离合器对齐工具 - 适用于F22、F30、E90、E82车型
2023-03-26
亚当·默菲 ODM 定制硬件模型 [ AOT 系列 ]
2024-01-13
精密1/24比例RC雪猫车身模型
2024-01-17
桌面上夹持斯坦利/耶蒂杯子夹具
2024-03-25
简洁盒子 - Elin
2024-04-01

最热下载

最新模型