对角线储物柜（小型）

Diagonal, Graduated Storage Cubbies (Small)

2024-04-18 00:20:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Heya!! You may have already seen my "Diagonal, Graduated Storage Cubbies (Large)", this is his littler cousin, "Diagonal, Graduated Storage Cubbies (Small)".

This cute little feller has just four single cubbies, 4" (100mm), 6" (150mm), 8" (200mm), and 10" (250mm) in height (or a little smaller so you can actually grab what's in there. The numbers are meant to indicate the size of stuff in those cubbies. This is meant to hold/store my zip ties, zap straps, whatever you wanna call them).

The cubbies are approx 2" by 2" (50mm by 50mm) and there are several mounting options for this guy. Side-mounted gives the lowest distance from the wall, end-mounted gives the narrowest cross-section upon the wall. It can also be easily desktop/benchto "mounted".

Nothing fancy. It's about 200mm by about 50mm by about 220mm... should easily fit inside of a 220mm cube like my Kobra Neo.

Gunna print it tonight and see how it works! Try it yourself and lemme know how it turns out! Be sure to check out my other designs for functional, practical workshop and office storage solutions!