天文钟夜灯LED

Celestial Clock Night Light LED

2024-04-18 11:32:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This requires a larger format printer, at least 310mm print bed.

I found these stencils here at https://www.thingiverse.com/thing:5491766 and thought they were gorgeous and wanted to use them.

I also used a small version of these on the clock
https://www.thingiverse.com/thing:6470019

I appear to have a thing for printing clocks (I have 21 on my clock wall) and so decided to design my own clock using these stencils. I wanted the clock to make these images celestial and star constellations and I think I succeeded.

This uses standard 5050 LED lights you can get from Amazon for $10 here...
https://www.amazon.com/dp/B0B1CBG47V

You need to print 2 of the LED plates, one should get printed in transparent PLA or white for use as the diffuser. I printed mine in transparent and added a single coat of snow white acrylic paint.

One plate contains the LED's and after my first try, I realized to get the effect I wanted I needed a lot of LED lights. See picture. Be careful making turns so as not to cover any other LED lights. I used around 15-20 feet of 5050 LED tape in total.

I redesigned the control box so it is larger. Every time I order LED's of any kind they always have different control modules, different sizes...this box fits all of them.

Use supports for the control box only, the rest does not require them.