带磁铁的指尖陀螺

Fidget Cube with Magnets

2024-04-18 11:35:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Fidget Cube Remix with Magnet Placeholders

This remixed version of the Fidget Cube incorporates placeholders for magnets, enhancing your tactile experience!

Required Magnets:

Number of Magnets: 8 magnets per cube, across 8 cubes (totaling 64 magnets)
Magnet Dimensions: 6mm diameter x 1.5mm height

Design Note: Each placeholder is designed to hold two magnets for increased strength. A variant with a single magnet per placeholder can be created upon request.

Magnet Sourcing: These standard magnets are readily available on platforms like AliExpress.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%+
Notes:
No need for Support, it is already part of the model.
Adding auto support by your slicer will probably damage the print.

Post-Printing

The manually added Support on the OUTSIDE and BOTTOM can be easily removed using a cutter.
The manually added Support on the INSIDE can be removed (less easily) using a utility knife. (shown, circled in red, in the picture)
You'll need to play with the cube for a few minutes in order to get a smooth and free action.