3dsjs

Ring有线门铃10度安装支架

Ring Wired Doorbell 10° mount

2024-04-18 11:35:45

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

We´ve got the Ring wired doorbell,but since our doorbell space is 90° to the street/way, we couldn´t see who was coming/going or standing a little further from the door.
I saw some options to buy but mostly 45°, which is way to much.
So here is a 10° Version which fits perfectly and the result is perfect.

You´ll need 2xM3 thread inserts and 2xM3x10 screws for mounting.
Just print the 3 pieces, insert the threads, slide the mount over the installed but unscrewed doorbell and use the original screws, for screwing it to the wall.
After that slide the 2 prints with the threads inserts in place (thread insert facing outwards/away from each other), hold the ring in place and screw everything into place.
Finally put the cover back onto the ring doorbell and you are finished :)

Keep asking if you have any questions :)

Print Settings

  • Rafts:
    No
  • Supports:
    Yes
  • Resolution:
    0.1-0.16
  • Infill:
    25-50%
  • Notes:

    Increase the perimiters, for thicker and therefore more durable walls.

Tags

Ring有线门铃10度安装支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢