Voronoi带
Voronoi Belt
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The belt is lightweight but enough durable, with a plastic buckle and flexible TPU parts. Width is about 3.8cm. Depending on the size of the printer table, you can select the appropriate parts and assemble a belt of the required length. To connect two parts, you need to thread the ends through the central holes of the fasteners as in the photo. When preparing to print, you can need to rotate the models 45 degrees in the slicer to get them to fit.
Length
Long parts for printers with a working field from 40*40 cm
- BeltLong1 (connects with buckle) - 51.5cm
- BeltLong2 (tail) - 51.5cm
Middle parts for printers with a working field from 30*30 cm
- BeltMid1 (connects with buckle) - 37.5cm
- BeltMid2 (ordinary part) - 37.5cm
- BeltMid3 (tail) - 37cm
Small parts for printers with a working field of 20*20 cm
- BeltShort1 (connects with buckle) – 22.8cm
- BeltShort2 (ordinary part) - 22.9cm
- BeltShort3 (clasps) - 21.7cm
- BeltShort4 (tail) – 22 cm
Thus, for example, if you need a belt with a length of 112 cm, you can take 2 long parts and one short, 3 medium parts or 5 short parts.
You can also additionally print the eyelet to put away excess belt if for some reason it is present.
Enjoy!
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
Celtic Knot Gridfinity容器2023-03-26 -
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
Wolf Mask ('adult') - 无支撑2023-03-26 -
FSU - Osceola和Renegade站在小台子上 - Florida State2024-01-13 -
仿真枪模拟消光器（变形版）2024-04-15
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
生态FLOW EcoFlow Wave 2风扇系列,EcoFlow Wave 2通风口2024-02-05 -
Arduino或5V继电器控制板固定架2024-04-02 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16 -
艺术雕像（女性）2025-07-16
最新模型
-
弹弓HGX-FRAME V1A2025-07-18 -
Vector Optics Omega 8 镜头保护罩2024-05-08 -
Casio SK-2100麦克风外壳2024-05-08 -
Quadlock 桌下手机固定器2024-05-06
