Voronoi灯基座（由Markellov设计）

Base for Voronoi Lamp (Markellov)

2024-01-13 04:00:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

designed a base the Voronoi Lamp by Markellov. It is designed to to house a 2032 battery holder. Several variants of the base are provided - they may be repurposed to suit your needs.

Print the base using either a filament (preferred) or resin printer. Use supports as required. Since the walls are relatively thin, you may use 100% infill. The models with legs need supports.

For a diorama with a scale of about 1-in-6, I printed the Abe at 100% and scaled Markellov’s model to 40mm wide (26.28%). I printed the lamp using a resin printer and then installed warm-white LEDs and a 3 volt 2032 battery holder in the base.

Clean-up, prime and paint your base as required. I painted mine using a wood-grain texture with a base colour of terracotta to give a teak appearance.