回收那些咖啡罐

Recycle those coffee cans

2024-04-19 03:20:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I like coffee and always need more storeage containers, I buy supermarket own brand 500g or 1lb cans, they make great storeahe containers but do not look good.

Cover with vynil after a while they don't look good again in a short while, prone to scratching, peeling & discolouring.

The answer 3d print them a jacket, I am using up old old ABS today and came up with this idea simple to model it took less than 5 minutes, simple to print less than 40 with last minute filament swap.

Same principle will work with many different cans etc.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
No
Resolution:
0.4 0.8 width with 6mm nozzle
Infill:
no Vase Mode
Filament brand:
any
Filament color:
any
Filament material:
any I used ABS bonded to can with acetone
Notes:
Modelled in Tinkercad large circle large hole then Group.

I added a V insert so I could clip down inside and trim two edges with scissors, V inserted not required just cut straight with scissors stck on end down and trim other to match.