超薄外部CD/DVD/蓝光驱动器

External Slim CD/DVD/BD Drive

2024-04-19 07:48:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is to turn an internal laptop slot load slim CD/DVD/BD-rom drive into an external one. The hole in the back is only sized for Sata, so an older pata drive may need some trimming. Print it with the open side up to keep the print from warping with over hangs. This may also fit a normal tray load, but I'm not sure and you milage may vary.

**Be sure to scale up between .2 and 3% for PLA and whatever else you may be printing in depending on filament. This is an exact fit so any filament shrink will affect fitment.

I've included the FreeCAD model, so feel free to edit and change what you want.

This model was made using the Panasonic UJ267 slot load BDRE Drive. It should be a standard fit for any drive but all measurements were based off of this one. Happy Printing!

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
20
Notes:
Be sure to scale up between .2 and 3% for PLA and whatever you need depending on filament. This is an exact fit so any shrinking will affect fitment.