超薄CD-RW盒

Slimline CD RW case

2024-05-05 11:21:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The demise of the CD RW unit in laptops has given rise for the need to salvage slimline units from replaced laptops to access legacy media. A case protects them and makes them easy to store, carry, or use on a desk.
Here are two functional cases designed for DL Storage and Toshiba units.
Slimline CD RW case for Toshiba mocelSN-208
Slimline CD RW case for HL Data Storage model GU70N
Print in any medium you want as there is no stress on the case.
The lid is the same for each case and is affixed to the with tape.
CD RW unit is held in the box by drilling a hole opposite a side (usually at the left rear or back) aving a threaded case hole and inserting a securing screw.

A the electrical attachment is made with a slim line SATA 6 + 7 to USB adapter.

Print Settings

Printer brand:
LulzBot
Printer:
Mini 2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
none
Filament brand:
MH
Filament color:
clear
Filament material:
PETG
Notes:
This case will not endure a lot of stress so just about any printing filament will work.

Post-Printing

fitting

Typical edge dressing will apply.

The top leaves room for printing error and potential warpage and when fitted there is about 2-4 mm space above the CD unit.

The top is designed to be held on with a strip of packing tape. Not fancy, but easy to disassemble.

Most slimline CD units have tapped chassis holes that will allow securing the unit inside the case. The location is varied so you will have to locate yours should you want to drill to use a screw for securing the unit. The case walls are 2 mm thick. A screw of 4 mm in length should be adequate.

超薄CD-RW盒

朋友，你觉得上面这个模型，属于下面的哪个分类？