帐篷折叠露营椅前腿延伸设计

Marquee Folding Camping Chair front leg extension

2024-04-19 08:02:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These front leg extensions tilt the cheap Bunnings "Marquee" brand camp chairs back a bit, which makes them way more comfortable as they are completely perpendicular from factory.

Left and Right models press-fit onto the chair's front feet but you could optionally drill a small pilot hole in the pin of my model to run a self-tapping screw from the top. They would only be knocked off if you drag the chair around and you can still fold the chair up and store it in the bag if you have the foot-end facing the bag opening.

Printed with supports for the angled bottom, using a 6mm support grid, bit of filing afterwards if you're worried about sharp edges afterwards.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
stock
Filament brand:
eSun
Filament color:
black
Filament material:
PETG
Notes:
Print with PETG if storing these in a hot car, PLA will deform. (at least it does here in Australia when it's 40c outside and 60+ in a locked car.)