自行车墙面固定架

Fahrrad Wandhalterung / Bike holder

2024-04-19 08:16:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/iUF5kpqZEHZ

Print with slightly higher temps recommended is +10 to 15°c for pla
Print with 4 top / bottom layers and 4 side layers.
Print with 15% infill. Recommended is triangular infill.
Should work for bikes up to 10kg

For bikes up to 15 kg
Use the same settings as before but increase the infill to 20%

For bikes up to 20kg and maybe more
Use the same settings as before but use 25 % infill and 5 top / bottom and side layers

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.28 mm
Infill:
15% - 25%
Filament brand:
Doesn't matter
Filament material:
Pla
Notes:
Print with slightly higher temps recommended is +10 to 15°c for pla
Print with 4 top / bottom layers and 4 side layers.
Print with 15% infill. Recommended is triangular infill.
Should work for bikes up to 10kg

For bikes up to 15 kg
Use the same settings as before but increase the infill to 20%

For bikes up to 20kg and maybe more
Use the same settings as before but use 25 % infill and 5 top / bottom and side layers