分形金字塔LED基座

Fractal Pyramid LED Base

2024-04-19 08:59:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Fractal Pyramid LED Base

This LED project utilizes WLED to control the effects of the light. (See WLED instructions below, if necessary)

Items Needed:

D1 Mini
8x8 LED Matrix
Super glue/E6000
Hot Glue

I recommend printing the pyramid in vase mode with transparent filament for best results.(See link to original pyramid design for printing instructions)

I also recommend printing the feet with TPU, if possible.

Post-printing Instructions-

Glue the LED Matrix to the flat side of the platform. E6000 works well
Clip the 5V,GND,DOUT and center 5V,GRD wires off the LED Matrix, leaving just the 5V,GND,DIN. Clip the female connector off the wires and solder them directly to D1 mini

Red-->5V
White-->G
Green-->D4

Test that WLED and matrix are working before gluing into base
Glue the D1 mini to the base using hot glue. You can add hot glue over the electrical connections as well, to insulate them.
Glue the LED platform and feet to the base, using E6000

The pyramid can just rest on the base, it does not need to be glued.

Great Job, now post a make because I'd love to see it :D

WLED Instructions

If you are not familiar with WLED, there are just a few simple steps to get up and running.

Plug D1 into PC via micro-usb (Cord must have data-transfer wire)
Go to https://install.wled.me/ (may not work in safari, Chrome works)
Click install and choose the correct serial port. If you don't know, unplug the D1 and plug it back in to see which port pops up.
after installation, you can opt to skip the WIFI setup settings.
Connect to the WLED-AP WIFI network that has been created (Password: wled1234)

From here you can choose to create your own custom configuration and presets,
or to get you started... you can just upload the backup files I have included, which will run through a playlist of presets upon startup (you can change the presets later to your liking-

To the Controls --> Config--> Security and Updates
Upload the provided configuration and preset backups respectively
(FP_LED_ConfigurationBackup1)
(FP_LED_PresetBackup1)

Amazon Links: (you may find them cheaper on AliExpress)_
D1 mini:
https://www.amazon.com/Organizer-ESP8266-Internet-Development-Compatible/dp/B081PX9YFV/ref=sr_1_2?crid=1E31Q3RB3ZKJ9&dib=eyJ2IjoiMSJ9.pllz8O-0No9StlvvAzWoEulJOnS-2_cXCN8gY2dpQgT-UagppD4YE640FOrRkMfH7KjSF48XuwzumvGq5jWtIh5oMSMefAnqLeIk-w7s9i7cPeYZPC04JhBcDX1qQZVh832cZLdWo4420LM5zT_HLVEMRIHjdbrq4YPqcmtyUcfox6G7i4vFJg4E15JMngt1StN7bUBVX8ZnCU16DNvK4Wq20UQ2CdCHEpHdKomD2zw.zwJR-Z20ZwHxBRs1hwvQejhM23T8jH0Sl6_GeASgaeI&dib_tag=se&keywords=d1+mini&qid=1713486306&sprefix=d1+mini%2Caps%2C83&sr=8-2

8x8 LED Matrix:
https://www.amazon.com/BTF-LIGHTING-Individual-Addressable-Flexible-Controllers/dp/B088BTSPYD/ref=sr_1_2_sspa?crid=2EWAVKM5ZCLSO&dib=eyJ2IjoiMSJ9.edemFXIstNBTHBhfO37nXYc0lLoO8CG_okRtij8YyAnwDn7Ir2OCZuOVA1QtijWi3hDeKKwUVybcH2QU5k6DZCqWxJXD9p5IKxsgoKZ1Sz06zuqYr2lj1E25DsvP3UGzd9pdTyxNGOa8M8mWmYlutwZzXoUNHkIZCMaWCknKF1oEAFEV0H4FjZ1xzfxNuT8MYY6d5A03viQ9qJCL9J6g3WAo-Urz-TEdENKUKLL-LPzujOEMdmCHeY2XzkBcDOdUa-l6NOTo0VJtdof8XDchY5V46FnGtbSHlxkaOOh01BA.WpViEVyd7LqoHFLR_YwtGme0rU1CgzUK3XAVHiiFP4o&dib_tag=se&keywords=8x8%2Bled%2Bmatrix&qid=1713486359&sprefix=8x8%2Bled%2Bmatrix%2Caps%2C84&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

Fractal pyramid:
The fractal pyramid i have included is just a rescaled version of Aeropic's remixed design.
Give them both a like for their efforts-
https://www.thingiverse.com/thing:2573402
Original model by Ricktu-
https://www.thingiverse.com/thing:1356547

If you have any questions or suggestions, please feel free to comment
I'm also in the works of a 170mm 16x16 LED pyramid base with sound-reactive capabilities. Stay tuned...