3dsjs

All-In-One Arrow Cutting, Squaring, and Testing Tool

2024-04-19 09:55:23

本站旨在为打开T站有困难的用户,提供快速的检索服务,本站并不储存T站的模型资源,所以最终的模型下载要去到T站。

Summary

This is an all in one arrow testing and cutting tool. Easily spin test arrows for straightness and spine testing. Cut and square the ends to any length needed. Each component slides anywhere on the track depending which function you’re using.

Additional items needed:

  • POWERTEC 71182 Multi T-Tracks | 36” Long - 2-1/4” High
  • ¼” x ¾” hex head bolts with nuts and washers.
  • Dial Indicator from Harbor Freight
  • Mini Benchtop Cut-Off Saw from Harbor Freight
  • Regular cheap skate bearings. I recommend you go as cheap as you can. I went with slightly better bearings and the arrow still doesn’t spin freely and it’s not necessary anyway.
  • A 1.94 lb weight for spine testing. I recommend a Scuba Diving Lead Shot Pocket Soft Weight. I just used an old medicine bottle hung with some paracord. Can add/subtract the lead shot to get to the correct weight.

Currently will test up to a 500 spine arrow. If you shorten the dial indicator mount, you could test higher spined arrows.
I disconnected the spring inside the dial indicator as it was flexing the arrow.
I had to drill out the holes for the bolts.

Print Settings

  • Printer brand:

    AnkerMake

  • Printer:

    AnkerMake M5

  • Rafts:
    No
  • Supports:
    Yes
  • Resolution:
    .16
  • Infill:
    50%
  • Filament brand:

    Inland

  • Filament color:

    Shimmer Red

  • Filament material:

    PLA

All-In-One Arrow Cutting, Squaring, and Testing Tool