Creality K1 和 K1C 盖子提升器 3D 模型

CREALITY K1 and K1C LID RISER

2024-04-19 16:58:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

/////ATTENTION

Depending on whether you're printing in PLA or ABS, use the STL files for the corners labeled PLA or ABS. All the parts are the same except for the corners. In the ABS version, the walls are 0.75mm wider due to material shrinkage when cooling. This difference ensures there are no gaps between the pieces. However, if you encounter any fit issues, I've included STEP files so you can adjust the corners to better suit your printer.

*In the images, you can see the orientation I used for printing each piece. The bump can be printed in two ways. I chose to print it upright to match the lines with the rest of the pieces. It's a matter of preference and aesthetics.

/////BOM to print:

1 x LID_RISER_K1C_BACK_VENT_ABS_PLA

1 x LID_RISER_K1C_BACK_WALL_ABS_PLA

1 x LID_RISER_K1C_BUMP_ABS_PLA

1 x LID_RISER_K1C_BUMP_VENT_ABS_PLA

1 x LID_RISER_K1C_BUMP_WALL_ABS_PLA

4 x LID_RISER_K1C_HANDLE_ABS_PLA

2 x LID_RISER_K1C_NORMAL_VENT_ABS_PLA

2 x LID_RISER_K1C_NORMAL_WALL_ABS_PLA

/////ABS version

1 x LID_RISER_K1C_BUMP_CORNER_ABS

3 x LID_RISER_K1C_CORNER_ABS