Audi A4 B7 交叉杆支撑配件更换
Audi A4 B7 Cross Bar Bushing Replacement
2024-04-19 17:12:30
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a replacement for the OEM Audi A4 B7 cross rod bushing (that they don't seem to sell separate) for the M/T 6-speed. It may well work for the B6 too, but I'm unsure. I printed this just as it is, out of nylon, and it worked fine. To install, use lots of lubricant and pop the ball in place, then insert into the bushing hole. Use a hair pin type clip (similar to Auveco # 24018 or 24037, but I can't remember the exact dimensions; sorry!) to hold it in. I've included many files, in case you need to modify it any (including undersizing the bushing for a worn ball).
Tags
Audi A4 B7 交叉杆支撑配件更换朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
轻量级螺旋桨2024-05-08 -
纹身瓶托设计2024-05-08 -
24byj到NEMA17适配器2024-05-08 -
树莓派相机外壳模型2024-05-08 -
DIY电动车速率保护装置2024-05-06
最热下载
-
模块化抽屉 2.02023-03-26 -
花环戒指2024-05-08 -
F1赛船3D模型固定文件2024-05-08
