极简风线轴搁架(可定制)
Minimalistic Spool Shelf (Customizable)
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a minimalistic spool shelf and a relative small print, which should fit on any 220x220 sized printer.
You simply stack filament spools with this shelf rim in between. The holes, usually used to fixate the filament on the spool, are used to screw the spools together and create a multi level shelf for your desk or workbench.
I use the stacks to hold my de-soldering and my hot air station on top. The shelf's below keep the accessories, tools and replacement parts.
The created shelf is very stable. If your spool only has one set of holes, you probably need to create an additional set on the other side to avoid creating a Spring-O.
The FreeCAD source file is included. Just open it with FreeCAD and select the Spreadsheet, where you can specify diameter or the spools and the screw hole size and spacing. So the shelf can be used for any spool size. By default there are holes for 3mm bolts, which secure the spools together.
Tags
License
Minimalistic Spool Shelf (Customizable)
by geit_de is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
最新模型
-
Makita DDF484钻孔架 / 钻孔机支撑架2024-05-06
-
Bad Batch技术头盔2024-05-06
-
外部电机用鼓风机2024-05-06
-
Shift Collar Boot Support - 可调节领口靴子支撑2024-05-06
-
欧乐B牙刷架,适合两支牙刷2024-05-06
最热下载
-
免费蜘蛛侠头像STL模型,适合3D打印2024-03-24
-
P90 AEG型号空气枪到Odin Airsoft速率加载器适配器2024-05-01
-
泰坦电视核心升级2024-05-02
-
F1赛船3D模型固定文件2024-05-08