基尔比烟雾抽取器（便携式）

Kirby Fume Extractor (portable)

2024-04-20 05:03:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a 3D printable kirby fume extractor that took inspiration from Chris Borge's kirby fume extractor. A few parts like the hinge that allows the kirby to turn up and down was taken from his design and I recommend checking it out. I took my own spin on it for my own purpose and made it so that it ran on a 9v battery instead of wall power. This is less voltage than the limit of 12v that the fan I used is rated for however the suction should still be pretty good for soldering.

The kirby is designed to specifically house the following parts:

Fan

Switch

Battery Connector

Some assembly is required but it should mainly be self explanatory. The screws that come with the fan are required to keep the front and back ends of the kirby together. The grate is intended to be glued to the back as well as the feet to the star and the cheeks and eyes. The only thing connecting the kirby to the star itself is the hinge connector which is able to be slid on through the bottom of the kirby. Some soldering/connecting of wires is required and is done in the hole of the right foot. You will probably need to cut some of the wires down to size so it all fits neatly in. The front end of the kirby has space for a filter to be placed.

I printed the kirby with a variety of different filament colors and spray painted some of the other parts to color. Filament type shouldn't matter too much however I did find that the battery panel was a bit bendy, so a tougher filament that's less flexible may be bettter.

I'm a highschooler who likes to make and design stuff in his free time so I hope you enjoy! If you have any questions on assembly or any feedback on the design, feel free to email me at yixinzhou3135@gmail.com

基尔比烟雾抽取器（便携式）

朋友，你觉得上面这个模型，属于下面的哪个分类？