磁性激光定位螺丝固定件

magnetic laser screw down standoff

2024-04-20 06:28:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

made these to lift sheet goods off the bed of my laser to prevent back flash, nothing fancy but the two parts screw together to accommodate multiple material thicknesses. i used support in the top of the "bolt portion" no where else sis it needed. printed great with a .6 nozzle at .24 layer height.

I used two of these magnets in each one,( https://www.amazon.com/dp/B0CQQ1CKFS?psc=1&ref=ppx_yo2ov_dt_b_product_details)

the magnets are a VERY tight fit, i would use a vise or pliers to get them in

Print Settings

Printer brand:
Anycubic
Printer:
Kobra 2
Rafts:
No
Supports:
Yes
Resolution:
.24
Infill:
20
Notes:
i used a .6 nozzle, any will work

Tags

License

CC BY

magnetic laser screw down standoff
by danoc1227 is licensed under the Creative Commons - Attribution license.

磁性激光定位螺丝固定件

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型