3dsjs

车体固定件

Screw on Body Mounts for Traxxas 1/16 E-Revo

2024-04-28 15:50:23

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

I designed this 3D printed upgrade that I called Screw on body mounts I designed these mounts years ago but I did not make them because i did not have the nylon filaments necessary to make them. but since now I have the Right filaments To make them I decided it was time to make them and I didd so And tested them out, As a result I was successful with the design but I need to do some tweaks to address some minor issues otherwise I was successful I made a short version of the post and I made a longer version of the post for the obvious reasons if you wish to download these files Set your 3D printer accordingly you know the drill I recommend no I command you to use The correct nylon filament. I also provided that knobs files Along with the body post. The knobs you can use pla or other Filaments By the body post themselves they need to be made in nylon filament. The photo should give you an idea what it should look like after putting everything together and after that you're done then from there you should be able to install it in your traxxas 1/16 e revo or other RC vehicle and after that you're done so enjoy.

  The parts that you will need for this is 
  1. 4 3mm screws long enough for the body post themselves We're installing the metal
    threads onto the Body post themselves
    I recommend you super glue to secure them thoroughly so may not come off.

  2. 4 3mm Nuts I recommend you look at the stl file That contains the knob file themself
    to you should your where the 3 mm nut should go, Then the little top to be used to
    cover the nuts that will be place inside the knob & you need to use super glue to
    secure it in place so will not come off.

    You can get these screws and they're will be at a hardware store like Ace Hardware will
    be my best recommendation unless you got something better that's what I have for
    you

Print Settings

  • Printer brand:

    Anet

  • Printer:

    A8

  • Rafts:
    No
  • Supports:
    Yes
  • Resolution:
    0.4mm
  • Infill:
    100%
  • Filament brand:

    Gizmo Dorks 1.75mm Nylon Filament 1kg

  • Filament color:

    black

  • Filament material:

    Nylon

车体固定件
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢