Onefinity Makita 65mm 2.25in 防尘靴
Onefinity Makita 65mm 2.25in Dust Boot
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Save a bunch over the the PwnCNC and SuckIt dust boot options. This Dust shoe clamps directly on to the router with a hose clamp, follows the z-axis, and has a removable magnetic base for easily switching bits. This is a unique design but was inspired by both https://www.thingiverse.com/thing:4798675 and https://www.thingiverse.com/thing:6188585. Check out their options for 4in dust collection ports!
This design is specifically meant for shop-vac standard 2.25in couplings.
This design uses 12mm x 3mm rare earth magnets (Amazon search if link is bad). I used these: https://www.amazon.com/dp/B0CCVPVQ1L?psc=1&ref=ppx_yo2ov_dt_b_product_details
This design also uses a 100mm x 1mm dust shoe brush strip (Amazon search if link is bad). I used this one: https://www.amazon.com/dp/B07VNSD1CJ?psc=1&ref=ppx_yo2ov_dt_b_product_details
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Infill:20%
- Filament brand:
Overture
- Filament color:
Black
- Filament material:
PETG
Post-Printing
Just remove the supports from the magnet pockets!
Tags
Onefinity Makita 65mm 2.25in 防尘靴相关内容
联系我们
热门推荐
-
旋转的正方形时钟2023-03-26 -
星球大战X-翼战斗机：AT-ST步枪与改造套件2023-03-26 -
丁丁火箭3D模型2023-03-27 -
GoPro 镜头盖及容器2024-01-14 -
蝙蝠侠标志2024-04-19
最热下载
-
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
Articulated Snake2024-03-30 -
CZ455 452 512 弹匣底板2024-04-22 -
中指2025-05-17 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最新模型
-
用于加长杆的戴森配件支架2025-07-17 -
P-Touch胶带架2024-05-08 -
莫洛托夫标记笔3D模型2024-05-06 -
漂浮式水耕模型2024-05-06 -
欧乐B牙刷架，适合两支牙刷2024-05-06