308 弹匣夹

308 Bullet Holder

2024-04-20 10:56:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed a holder to hold loose 308 rounds. This should hold 100, at my current settings it fits them just snug enough for me. You insert them bullet side first and it kinda "clicks" the bottom of the casing. At least in my case they have. I have printed 3 of them so far and haven't had issues personally. InfillI did cubic@10 but you can probably do whatever you feel like to make it sturdier or faster to print. Mine was roughly 11 hours or so.