拆开式小型Minecraft杰克奥拉灯,内置LED灯
Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanHappy Haloween!!!!
This is a 1/4 size version of my previous Minecraft Jack O'Lantern, now with integrated LED and CR2032 battery and 3d printed button controls. And best yet, it prints WITHOUT SUPPORT!
You can print either with a hole in the stump, or without, and you're probably going to want to print one of my Flame LED Diffusers as well.
The LEDs I'm using have an integrated candle flicker chip and 29mm long leads, so that they can be bent around and used as contacts for the battery.
If you would like to use as a keychain, you can print with the stump with a hole and use some common ball chains like you would find in a hobby store or here: https://www.amazon.com/dp/B0785G1SBP/ref=cm_sw_su_dp
I put together a Youtube video to explain the assembly, which involves a bit of sanding and fitting here:
https://www.youtube.com/watch?v=9dpTfo4SHSE
I'm using a Monoprice Maker Select Mini with pretty good tolerances, and I'm able to fit the parts of this print together with only a little sanding or shaving to remove a slight bottom layer over-extrusion. If your printer is over-extruding, you may have to do more sanding.
Also -- and I apologize for saying this -- you might want to have some crazy glue on hand. All parts are meant to snap together, but there is a real risk of something breaking off, particularly the bottom corners of the stump.
This project is dedicated to my father, who taught me how to build things with my own two hands.
n拆开式小型Minecraft杰克奥拉灯,内置LED灯相关内容
猜你喜欢
联系我们
热门推荐
-
双头螺栓卡车连接接口磁吸式外壳2023-09-11
-
奔驰的小马展示2023-09-16
-
Panasonic Lumix GX8 前置旋转环2024-03-21
-
Be 200 超级水轰飞机2024-04-09
-
虚假电子烟2024-04-21
最热下载
-
斯坦利杯2024-01-11
-
沙箱建筑模型2024-05-08
-
塑料扣(3D打印无需支撑设计)2024-05-08
-
螺旋锥形手玩具(全新)2024-05-08
-
F1赛船3D模型固定文件2024-05-08
最新模型
-
10ml注射器活塞2024-05-08
-
Tomy赛车驾驶舱部件2024-05-08
-
简易蘑菇模型2024-05-08
-
装饰艺术风格灯罩适用于GRÖNÖ灯2号2024-05-06
-
钨皮艇密封环2024-05-06