通用手机支架（适用于Endecker 3）

Universal Phone Holder for Ender 3

2023-03-26 20:28:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This is a phone or GoPro holder that is powered by the elastic force of a rubber band. It's designed to hold a heavy phone/tablet, or a lightweight camera.

It bolts on the left/right side of the printer, and uses the 2 bolts that are already there to attach it.
Or it can slide onto the 4040 aluminum extrusions with a quick release.

Many camera holders mount onto the X gantry, I didn't like the angle this provides, or the added weight to the Z axis. This allows you to set the camera right in front, where you can get the best viewing angle.

The connectors that I designed are made to replicate the GoPro style hardware.

The "Ender_Mount_4040_Vslot" is a quick connect system. You can easily remove the entire assembly by just pulling it out, or just snap it back in. It just slides into the 4040 aluminium extrusions.

Buy your printer parts from Banggood for a great price!

Installation

First you need to tie a slip knot with a rubber band around the peg in the slide.
Fit the track and slide together.
Then you need to pull the rubber band through the hole in the slide, and hook it around the peg in the track.
It can be pretty difficult to pull the rubber band through. I suggest making a hook with a paperclip, or some filament.

Each rotating connector piece has a cavity for a 10x3mm magnet. This part is only intended to hold the mount upright, or a slight angle. It would need a larger magnet, or a more physical connection to hold it better, but it should work fine here. The magnet isn't strictly needed, but it does help.

Parts

1 small rubber band for the track/slide

The Thumbscrews need these nuts/bolts

M5x45 Hex Bolt - Long
M5x35 Hex Bolt - Short
M5 Hex nut or M5 Acorn nut

I couldn't easily find a cheap source of M5 nuts/bolts, so I just bought some GoPro style Thumbscrews. They were 10 for $6

Credit to T70E for the use of the Thumbscrews from his GoPro Mount Kit

Also check out my other Ender 3 models (Image links)

Tool Holder