多米诺聚合物滚筒适配器 V2

Polymaker Spool Adapter V2

2024-04-22 10:00:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This just fills the inside of the cardboard spool bore so it'll roll smoothly across a spool holder that goes through the middle. I use ASA, but almost any filament would be fine for this since it's a low stress part. The design is dimensioned to be made with a .6mm nozzle, .8-.9mm wide perimeters, and .28mm layer height. An internal brim is good but probably not necessary.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.28mm
Infill:
none
Filament brand:
Polymaker
Filament color:
white
Filament material:
ASA
Notes:
I use ASA, but almost any filament would be fine for this. The design is dimensioned to be made with a .6mm nozzle, .8-.9mm wide perimeters, and .28mm layer height. An internal brim is good but probably not necessary. I use ASA, but just about any filament would be fine for this since it's a low stress part. It just fills the inside of the cardboard spool bore so it'll roll smoothly across a spool holder that goes through the middle.