彩虹圣诞球（3件套）

Kaleidoscope Christmas Balls (Set of 3)

2023-03-26 20:29:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

不可售卖

我分享了我的文件，以便你们可以自行制作或作为礼物赠送给他人。我希望你们能享用这些文件。请注意，我不允许任何人出售我的作品。请不要向我提出这样的请求。

更新

I've uploaded new versions of all 3 ornaments - with and without supports - that have reduced poly counts and hopefully improved geometry. They have not been tested. They should be considered EXPERIMENTAL. If you are unable to slice the earlier versions, try the new ones (their file names end in "Remesh").

更新

I've uploaded a version of each ornament with built-in supports to help anyone having issues with with the print failing. You'll still need slicer-generated supports for the base, but I was able to get a great print using an overhang angle of 67 degrees. This resulted in a cleaner print than printing with a 60 degree overhang angle and no built-in supports.

总结

This is a collection of 3 ornaments. I call them "kaleidoscope" ornaments because the patterns are reminiscent of the designs you see through kaleidoscopes. These are part of my Christmas Collection. Thanks go to @purplehazey for requesting the supports.

I designed these using Affiinity Designer to create cross-sections and then did everything else in Blender. v3.6 and v3.7 are the same except the loop at the top is rotated 45 degrees, changing which pattern faces forward. Straight-on, they look like completely different designs.

I designed these to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, these are 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled v3.7 at 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale them down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

彩虹圣诞球（3件套）

朋友，你觉得上面这个模型，属于下面的哪个分类？