圣诞生芭场景二号

Nativity Scene V2

2024-05-02 00:37:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Nativity Scene that I created to be printed flat on the build plate. This layers one over the other to create a scene that can be lit with a tea light or other lighting. I intend to add more lighting to the topper to see if i can make the LEDs go into the top and project light down for the scene. Also added in larger base to fully enclose the the print in a present box.

Each scene is a 6x7inch print that should lay flat and print without supports on the print bed. The entire thing assembles without any glue or fasteners and should sit easily on a flat surface. Layer height can be anything but standard .2 should be fine. This base cover is optional as it sits on top of the counter or table pretty well. If printed in PETG it will store better over the summer and have less sag or warping.

Useless information: This is still a work in progress and will probably be a V3 before long, however, the main reason for the update is that over time the prints where flapping and breaking when my kids played with it. Another reason is that the tabs on the bottom of the base warped and changed during storage, this enclosed version should fix that. The base is new and now has more room for lights or music to be added. Base will allow most tea lights to be put in easily and latch shut with the cover. I added a topper to enclose it with the new base and intend to again add in more lighting so that it lights up better. Any feedback will be welcomed if you made it this far.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
Yes
Supports:
Yes
Resolution:
.2
Infill:
15%
Filament brand:
Overature
Filament color:
White
Filament material:
PLA
Notes:
The only thing that needs supports is the base. The rest of it should be orientated correctly and not need supports at all.