模拟二号垂直支撑架配带Hu卡显示器挂钩

Analogue Duo Vertical Stand with HuCard Display Bracket

2024-04-29 06:49:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Important

I do not know enough about the Analogue Duo to claim that it can safely operate in this orientation. Please consider removing it from the stand before using it, otherwise you are responsible for any risk or damage to the unit.

Description

A vertical stand for showcasing your Analogue Duo without using up valuable shelf space. Included are two versions: power button at the bottom (in photos) or on the top. I made a few additional tweaks after the photos were taken including a wider base and taller sides. Refer to the render photos and live 3D view.

Also included is an extension bracket for a HuCard so that you can fully display the label while inserted into the Duo.

Print Notes

The base can be printed as is. >=10% infill of your choice and at least 2 walls should be fine.
The HuCard bracket should be printed on its side as shown in the render. The walls are thin (0.5 mm) in order to fit into the Duo. If you're having trouble with bed adhesion, try using a brim to keep it attached