Canted Rail（皮卡尼尼）

Canted Rail (Picatinny)

2024-04-22 18:52:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Picatinny 45 Degree offset rail mount with thumb screw mount

slight variations in model was made specifically for the mounting clip to prevent plastic from breaking, had to make the clip tooth a bit thicker and give some material on top of it

accurate to real dimensions no clearance was made i included the F3D file if it does not fit your rail just scale by 0.1 mm or as much as you like

use a 4 mm screw without a head or a threaded 4 mm rod to attach the thumb mount
i left a 2 mm hole at the end for a knurled threaded insert
the thumb mount has a 1 mm hole on the sides for a recessed set screw to fix it to the screw
you can use superglue if you want

you do not necessarily need a 4 mm screw for this anything lower can work as long as it fits the knurled threaded insert

now i know the hole on the thumb mount is 4 mm and i said use a 4 mm screw and logically it wont fit so i am here to make you happy

to make it fit your screw measure the head of the screw say it was 5 mm what do you do ?

open my F3D file that i included and scale the thumb mount by as much as you want for it to be able to fit the screw head, then just simply make a 5 mm hole in it and export it to whatever file type you like, you can as will make it much bigger this is a 5 slot rail if you want say 8 slots you can just simply extrude the rail
the slots are 5.25 mm and in between each slot is 4.75 mm

if you want to offset to 60 degrees let me know and i can make another one

thank and have fun