轴承工具削波器III型

Bearing Tool Scarp Evo III

2024-04-22 20:02:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Dear Customer,

These tools help to replace the bearings and sealings at your KTM Scarp Evo III frame.

Please see below pictures how to use it. Never forget to use the washer between the screws, nuts and the printed parts.

Additional parts needed:

Rocker
-Screw M8xx80 (full thread)
-Nut M8
-Washer Ø8,4/Ø25
-Washer Ø10,6/Ø22

Mainpivot/Rear traingle
-Screw M10x50 (full thread)
-Washer Ø10,6/Ø22
-Washer Ø11,4/Ø33

*Disclaimer:

Dear Customer,

We would like to kindly inform you that, as we have no control over the printing process, the printing and use of the parts is at your own risk and responsibility. Please note that parts may damage or destroy your bike or other parts if printed incorrectly, which could potentially lead to an accident. Therefore, we recommend that you only print the parts if you have sufficient experience with printing materials and printing processes to be able to assess the stability and durability of the printed parts.

Therefore only replace the bearings by yourself, if you have sufficient experience. Otherwise please contact your dealer.

Incorrectly installed bearings and damage caused by improper installation can damage the bicycle or pose a danger to life!