Tether-Cap V2

2024-04-23 01:02:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Taking inspiration from the "PeniCap" and a generic, ring-less PA tube, I made this, the Tether-Cap. It is meant to be used with a tetherspout to lock onto the penile head only, although with the addition of another hole along the bottom you could use it with any PA piecing. I left the front solid so that you could size/scale the model as you need to fit you and add the holes at the size you need (via a drill or in slicer).

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 KE
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
100%
Filament brand:
Elegoo
Filament color:
Black
Filament material:
PLA+
Notes:
An outer brim and a small amount of internal supports will result in better results, but I have found them to not a hard requirement.