Celtic风格的游戏参与者与容器

Celtic Coaster and Holder

2023-03-26 20:33:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

```html

A celtic themed coaster I made as a gift this year, inspired by several other coaster designs I found. They are 90mm in diameter and there is a fitting holder included here.
Both are optimized for printing in two colors and with a 0.6mm nozzle, so that wood-filled filaments can be used.

For a nicer look and usability, I attached adhesive felt pads of roughly 1.3mm thickness to the bottom of the coasters, resulting in a total thickness of 4.3mm per piece.
With that, the holder can hold 5 coasters, without felt pads it can hold 8.

I recommend printing the top layer or the complete emblem with as many perimeters as possible. This prevents tiny infill moves, which look/feel rough with most printers (mine included). I've uploaded a screenshot to illustrate this.
If your slicer supports it, It's also a nice feature to use "Hilbert Curve" as the top infill method, because it gives a somewhat natural texture.

If you print them please post a make and tell me in the comments if yours happened to have any problems with hot drinks.

```Celtic风格的游戏参与者与容器

朋友，你觉得上面这个模型，属于下面的哪个分类？