MPCNC Primo - 65mm Tool Mount - Makita

2024-04-23 15:30:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This tool mount is specifically designed for the F-25mm MPCNC Primo.

You'll notice that the original tool mounting plates are no longer necessary as they are already integrated into the holder. You can utilize the original screws to attach the holder, although you may need a ratchet for the job. One thing to keep in mind is that the spindle now sits closer to the Z-axis, enhancing stability, albeit with a slight limitation in its range of motion (as illustrated in the picture). This adjustment prevents any potential collisions with the bearings. Additionally, accessing the on/off switch might require a bit more effort when switching the router manually.

The screws for clamping the router are ingeniously angled, facilitating easy access, especially if you're using a vacuum mount. Furthermore, thanks to its symmetrical design, you have the flexibility to rotate the mount by 180 degrees if needed just in case the vacuum pipe is located on the left side.

The primary aim of this design is to streamline the setup by having just one printed piece between the Z-axis rails and the router, thereby bolstering stability during milling operations. While it leverages the original parts, you will need an extra screw and nut for securely clamping the router in place.

It's worth noting that this design has been successfully tested with the Makita RT0700, and it's likely compatible with DeWalt routers as well.