3dsjs

极简缆索道系统,适用于GoPro Hero3

Very simple cablecam dolly for GoPro Hero3

2023-03-26 20:35:09

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

English

If you enjoyed the cablecam dolly, you may also like my "terrestrial dolly" http://www.thingiverse.com/thing:911531
If you find my design interesting, you could make a small donation: https://www.paypal.me/fbuenonet

This is a very simple system to create a cablecam dolly with a GoPro camera.
The pulleys are printed by halves so we can obtain the highest possible quality. If printed on nylon wear resistance is obtained, but not because it is a comprehensive system use will be sufficiently strong if made in ABS.
The bearings that I had at home are one of 16x5x5mm, but you can use other modifying inside hole in the pulley. Open SCAD file is included.
You can use the original housing of the GoPro waterproof camera, but I used the bumper of http://www.thingiverse.com/thing:330231
Updated (2014-09-14): After testing the bumper mentioned, I've decided to design one that is much more resistant http://www.thingiverse.com/thing:462309

Español

Si te ha gustado mi cablecam dolly, es posible que también te guste mi "dolly terrestre": http://www.thingiverse.com/thing:911531 o incluso, te podría interesar hacer un pequeño donativo https://www.paypal.me/fbuenonet

Se trata de un sistema muy simple de crear un cablecam para realizar un travelling con una cámara GoPro.
Las poleas se imprimen por mitades de forma que podamos obtener la mayor calidad posible. Si se imprimen en nylon se obtendrá mayor resistencia al desgaste, pero ya que no se trata de un sistema de uso exhaustivo, será suficientemente resistente si se realizan en ABS.
Los rodamientos que yo tenía por casa son unos de 16x5x5mm, pero se pueden utilizar otros, modificando en agujero interior de la polea. Se incluye el archivo de Open SCAD.
Se puede usar la carcasa estanca original de la cámara GoPro, aunque yo he utilizado el bumper de http://www.thingiverse.com/thing:330231
Actualización (14-09-2014): Después de probar el bumper mencionado, he decidido diseñar otro que sea mucho más resistente http://www.thingiverse.com/thing:462309

极简缆索道系统,适用于GoPro Hero3
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15