Lego 兼容型金属网围栏（打印即用，无需组装）

Lego Compatible Wire Mesh Fence (Print in place/No assembly required!)

2024-04-23 19:30:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello everyone! This is my debut project as a budding designer ready to make a mark on the world of Thingiverse! I'm a professional 3D Modeller and 3D Printing expert, and today I present to you a simple, 80 x 8 x 63 mm print in place wire fence!

It can be easily snapped on to any build plate, or left to stand on it's own. No need for supports-it's easily printed in place and ready to go off the plate! No need for glue or post-processing, either!

It is recommended to print the V2 model, as the spaces between the wire holes are bigger and won't droop like my original in the picture, but if your 3D Printer is good and well calibrated, and if you have the time for a slower print, you can print the original too! (More realistic as thinner wires)

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
No
Supports:
No
Resolution:
0.2 works well, but 0.4 and 0.8 might work too
Infill:
15-20 is good enough for most prints
Filament brand:
Bambulabs PLA
Filament color:
White
Filament material:
PLA
Notes:
You can add a brim to help with adhesion, so that it won't fall off the plate, but you can also just tune up the bed temperature too.

No assembly and glue required