Dilbert - MMU
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
MMU version of Dilbert
Dilbert, from the comic strip 'Dilbert' by Scott Adams.
If you have not experienced the profound wisdom that Scott Adams voices through Dilbert, then I highly suggest that you check out his comic strip.
The model, as presented is 70mm tall.
This MMU model was derived from my non-MMU model (reworked for a clean MMU print).
(note: I have not completed testing/setting purge values, therefore there is some bleeding in my print)
Enjoy!
Print instructions
Size up if you prefer a bigger version.
I've included a Prusa Slicer 3MF file that I used for this print.
Individual STL parts are also included for other slicers.
Be sure to check/set the purge amounts for the colors based on your filament brand.
Tags
License
Dilbert - MMU
by reddadsteve is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
罗霍卡佩模型2023-05-20 -
Ender 3 SE V3摄像架2024-03-14 -
Apple Vision Pro磁吸充电盒3D模型2024-04-18 -
ICTA D20毫米电气导线出口板2024-05-03
最热下载
-
Voith Schneider 螺旋桨 VSP2023-04-11 -
红米手表4号充电基座2024-03-15 -
Dyson V6系列3D模型适配器站2024-04-15 -
CZ455 452 512 弹匣底板2024-04-22
最新模型
-
手电筒支架2024-05-08 -
瑜伽垫固定挂钩2024-05-08 -
叉子与托盘 - 专为Bruda玩具设计2024-05-06 -
CIS 编织线火花线插头固定装置2024-05-06 -
适用于Acetech Brighter C的枪口消音器2024-05-06