门把手墙壁保护器

Doorknob Wall Saver

2024-04-24 13:30:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wall saver that attaches to the wall and protects it from being banged up by a doorknob. Intended to be printed in TPU, but will probably work fine in PLA.

The other designs I found on here weren't quite what I wanted aesthetically/size wise, and were mostly intended to be made in PLA/hard filaments, so I made this one up instead.

The model with a command strip slot is sized to easily fit a standard "poster" command strip. If using the regular model with no command strip slot, I recommend mounting it with some thin double sided wall safe tape, or by making loops of painters tape a la college dorms

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
No
Resolution:
0.12 (0.2 initial layer)
Infill:
15% gyroid
Filament brand:
Bambu Lab
Filament material:
TPU 95A HF
Notes:
Seams "back", print the flat face down. The chamfer is 50 degrees so it should come out fine. Plus you get the build plate texture on the forward facing surface, which is nice.