清洁碗具

Clean Dishes, Dishes Dirty, dishwasher sliding sign

2023-03-26 20:38:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

(Update: 4/25/2018 - I added a blank version part A and B so you can cut or stick your own words. Thanks to TurtleKid for the suggestion.)

This is a sliding Clean/Dirty Dishes sign for your dishwasher.

Instructions:
n*If you have been 3d Printing for a while - you are probably ok without these instructions for changing colors to make "Clean" Green, "Dirty" Red, "Dishes" Black, and the body silver. However, read on if in doubt and feel free to comment if you need clarification/help.

Start "Clean_Dirty_Sign_Parta01.STL" with green filament or whatever color you want for "Clean">
As soon as you start to see the sidewall edges form for the word "clean" on the left, which indicates that the word clean's last layer is finished, then change the color to red for the word "Dirty">- Change From Green to Red at or between 2.6mm to 2.8mm
When the red word Dirty is complete, you will see the sidewall edges form around the word "Dirty", and that tells you it is time to change to black for "Dishes">- Change From Red to Black at this stage
Finally, spray paint the entire sign with a black finish to ensure durability and aesthetics.

Break a magnet in half (or optionally use whole magnet) and paste the halves on the inside of part B (the "Dishes" part) next to each side wall as depicted in the picture of the Black part. Before gluing, check the polarity with the main part for magnetic attraction to the "Clean" and "Dirty" sides of part A. You can snap the two parts together to test this.

Ensure all components are securely fastened and the sign is properly mounted for stability. Safety first!

清洁碗具

朋友，你觉得上面这个模型，属于下面的哪个分类？