塔科马第三代油填充适配器

Tacoma 3rd Gen Oil Fill Adapter

2024-04-28 15:49:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

On Toyota Tacoma 3rd Gen the oil fill is angled which makes it difficult for funnel to stay in place. I purchased a thread in funnel but the angle still requires pouring oil slowly. So I modified #boyguan designed "Toyota Oil Cap Funnel Extension M37 x 3" https://www.thingiverse.com/thing:6098348 using #Austinnass "Copy of Bent Pipe Generator" to correct the angle so funnel is vertical https://www.thingiverse.com/thing:2324268l. I created several spacers to ensure the adapter is vertical when tightened. Spacer can be super clued to adapter.
Oil fill cap can be threaded onto adapter and left on like normal.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Plus
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
10%
Filament brand:
Polymaker
Filament color:
Dark Green (Matte)
Filament material:
PETG
Notes:
- print speed 35 mm/s - 50 mm/s
- cooling 20%
- wall print "inside to outside" so supports not needed but can't hurt
- infill gyroid for strength