可定制挂钩板安装系统

Pegs - Customizable Pegboard Mounting System

2024-04-28 15:50:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Pegs is a mounting system for a variety of bins/hooks/etc, meant to work with standard Pegboard. It is designed to be printed with no supports, and to be strong even when printed with PLA.

How does it work?

The "Peg Mount" prints as a flat piece. After it prints, you fold it in half, and fit it into your pegboard. Then you slide bin, hook, or other creation down over the mount to have it securely hang from the pegboard.

Do you need a different sized hook/bin/etc?

Use the Thingiverse Customizer or OpenSCAD, choose the part you want to generate, then customize its settings. You can change sizes, add dividers, change gaps, and a lot more. You can even modify how many mounting points larger containers will have. There's a ton of settings available.

What if things aren't fitting?

All printers have different tolerances. You can use the Customizer to adjust those. Most tolerance changes will impact the "Peg Mount" piece, not the bins, so if you have to adjust the fit, you don't need to reprint all your bins. For my printer which I made these for, the peg fit snugly into my pegboard with some light force, and the mounting connections are very snug at the end to avoid them being easily bumped off.

Can I mount something else not included?

You sure can! There is a "Mount Cutout" option in the OpenSCAD file and in Thingiverse Customizer. You can generate a "cutout" piece, to subtract from your own models, to add a slot. If you do make anything, please share!

Does this look familiar?

This entire concept is base off of Sy's pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system

I wanted to make a bunch of custom containers and such that worked with the system, but it was in a platform I don't prefer. So I went ahead and, as a fun project, remade the concept from the ground up. I can't say if all my "improvements" beat the original, so be sure to check out his work!

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Filament brand:
Not sure
Filament material:
PLA
Notes:
I printed all parts in PLA. You generally should never need supports, and all parts are oriented ready-to-print.

Special note: The hooks have a VERY small attachment point to the bed. I printed without supports, but if that is problematic try adding them for the very bottom of the hook. Or try a raft.