Avatar双天线支架Quadmula警报器F3

Avatar Dual Antenna Mount Quadmula Siren F3

2024-04-28 22:00:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

have Dual Antennas. The mount holds 15.1mm wide antenna with a stem tube of 30mm long.

Only two support enforcers are needed where pictured above. You'll also need clean tpu print setting to achieve the proper clearances.

If it doesn't slide in with little force, DO NOT FORCE IT. you need to adjust your settings or you will break your antenna.

If you're having trouble feeding the u.FL connectors through. Tie a piece of thread or fishing line to the end of the wire to help feed it down the tube from the bottom end of the mount housing. Alternatively, you can melt the bottom tpu hole with a small hot piece of metal to accommodate your needs.

To remove your antennas use a blunt stick from the bottom and push on the black antenna tube to slowly work it out. DO NOT PULL ON THE TOP BULB. Once you have the stem accessible from the top grab it with some needle nose pliers and pull the rest out