FlushPro Perko 蛇形夹具，金属支架替代品

FlushPro Perko worm clamp with sides metal bracket substitute

2024-04-29 00:25:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This THING fits the Perko Flushpro 2-5/8" freshwater intake and clean out. It is a substitute for the metal worm clamp with sides on the outside of the Perko Flushpro. Install in two pieces with an ordinary worm clamp fitting on the outside of the THING in the groove provided in the THING. This THING holds the two parts of the FlushPro together. I recommend using a little gasket maker as a sealer between the upper and lower parts of the FlushPro before installation of the THING. Perko doesn't sell the their proprietary metal worm clamp with sides, so this THING solves that problem.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
normal
Infill:
normal
Filament brand:
normal
Filament color:
any
Filament material:
pla
Notes:
Use ordinary settings and use ordinary PLA. No special settings are needed. No special PLA is needed.