大谷翔平洛杉矶道奇 3D模型

Shohei Ohtani Dodgers (HueForge)

2024-04-29 00:54:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I created this model using HueForge (https://shop.thehueforge.com) which is a "filament painting" application that generates 3D models from images. Source image is from https://twitter.com/MLB/status/1734395479809544695. I sliced the model using Cura 5.7.0 for Mac, and relevant settings were as follows:

Infill 100%
Layer height 0.08 mm
Base layer 0.16mm
Layer 1: started with black filament
Layer 5: changed to dark blue filament
Layer 9: changed to light blue filament
Layer 14: changed to white filament

My Cura slicer had no issues with 126 MB model that came straight out of HueForge, so that is the one that I used for my print. I also provided a simplified 13 MB version in case helpful. Your results may vary based on the specific kind of filaments that you use and the transmission distance properties (read more about it on the HueForge website if interested) of each filament.

If you resize the model, and you want to try to get the same look using the same filaments that I've described above, make sure to resize only the X and Y dimensions and leave the Z height as is. Of course, there is no single “correct” way to print this model. Have fun experimenting with different filament colors and layer changes.