乐高工程师打印机控制中心

Lego Engineer printer control centre

2024-04-29 01:23:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

On a lazy Sunday had an idea to put a Lego man in a control centre on my Ender 5 pro and looks so funny when the printer is running. Built a staging deck and have ordered another Lego man to occupy that area.

All the holes for the connecting bolts are 3mm.

Did the design in Sharpr3D and used Cure 5.7.0 to slice the the design set to super quality, which I use for all my printing.

The control centre is fixed to the extruder on the back plate but please note the back plate is not the original and was changed as I had upgraded the extruder to direct drive. you may need to design and print a bracket that will match your printer.

I also have a Ender5 S1, which I am looking to print another for control station, which I will need to design a special bracket for that printer and will publish when I do It.

I have included the Shapr3D and the step file so you can modify as required.