阿尔马 INFRACTION 3S BLX 驱动轴保护装置
ARRMA INFRACTION 3S BLX DRIVESHAFT PROTECTER
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
If you have been having issues lately with rocks getting caught between your slipper nut and center driveshaft, causing them to chew away at the slipper nut and loosen the tension on the slipper pads, then this is the solution! This driveshaft protecter for your ARRMA Infraction 3S BLX/MEGA helps deflect rocks away from the center driveshaft and prevent them from causing damage to the slipper nut.
PLEASE NOTE: ONLY fits into fully composite motor mount set, NOT the aluminum one.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:15%
- Filament brand:
Hatchbox
- Filament color:
Silver
- Filament material:
PLA
Post-Printing
All that is required to assemble this is to push it into the arc on the composite motor mount plate and it should stay in place by friction.
How I Designed This
I designed this using Onshape.
相关内容
联系我们
热门推荐
-
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
grip and bta for Vision TFE2024-03-19 -
3D打印 Hawkeye Thumb 2摄像头模型2024-03-21 -
TBS源一V5 Matek M10Q 5883 Vifly GPS伴侣SMA安装座2024-04-11 -
CZ455 452 512 弹匣底板2024-04-22
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26
最新模型
-
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
高跟鞋鞋架2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15