后市型把手适配器

Aftermarket Handle Adapter for Simjack Handbrake

2024-04-29 15:18:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

An adapter that allows you to attach an aftermarket shift knob to the Simjack load cell handbrake from AliExpress. The knob screws onto an M8 bolt fed through from the bottom. Use the screws and bushings that came with the handbrake to attach the adapter. I believe this will also work with the heusinkveld handbrake v1 as well.

I placed the upper hole to position the handle where the stock one would be when it is adjusted fully forward. I have attached the Fusion 360 file if you want to modify it.

Printed it at default “.20mm Standard” settings with 999 walls and it's been going strong for a few weeks now. I cut the mount in half and laid each “leg” flat on the build plate. This way, no supports are needed and the mount holes remain round.

Print Settings

Printer brand:
Bambu Lab
Printer:
A1 Mini
Rafts:
No
Supports:
No
Resolution:
.20mm
Infill:
15%
Filament brand:
Bambu PLA Basic
Filament color:
Black
Filament material:
PLA
Notes:
Cut the mount in half and lay each "leg" flat on the build plate. This way, no supports are needed and the mount holes remain round. Glue the halves together afterward.