Treedix USB数据线测试仪器外壳

Treedix USB Cable Tester Enclosure

2024-04-29 22:56:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I bought a Treedix USB cable tester on Amazon, but it comes as just a circuit board. There are a couple of cases that others have made, but I decided to try my hand at making my own.

I wanted to have the circuit board fully enclosed at the sides, with the usb sockets recessed, but easily accessible, and with the option to toggle the power switch from outside.

I designed this in Fusion - first I mocked up a model of the circuit board so I could ensure it would all fit together correctly.

There are two lid options - one plain, and one with "USB Cable Tester" text.

Needs M3 x 10-12 screws - 4 off.

Print Settings

Printer brand:
UltiMaker
Printer:
Ultimaker S5
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
0.15
Infill:
20%
Filament brand:
Any
Filament color:
Black / White
Filament material:
PLA
Notes:
Flip the lid upside-down, and no supports should be needed. I placed top, bottom, and switch near to each other and used a raft to ensure it all stayed stuck (particularly since the switch is pretty small)