近乎完美的GT2安全带固定夹

Almost Ultimate GT2 belt clamp

2024-04-29 22:56:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This clamp is less than half the width of my Ultimate belt clamp. I have not tested it but I don't see why it wouldn't work. Let me know if you try it.

My Ultimate belt clamp is so strong that your belt would most likely snap before it slips out. The downside is that clamp is a bit chunky and may not fit will in your application. Since having a clamp that strong is unnecessary, I figured that a clamp using the same principle but with half the engagement would be acceptable.

To use this, simply slide the sleave portion of the clamp over the belt and place the toothed wedge portion onto you GT2 belt. Slide the sleave up over the belt/wedge and press them together. It should get tighter the harder its pulled.

Print Settings

Printer brand:
Anycubic
Printer:
Vyper
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament brand:
Jarees
Filament color:
whatever
Filament material:
PETG
Notes:
Print using a 0.4mm nozzle or smaller.
This should work made from many different materials.