雪佛兰Bolt EUV定制车库门自动开启器——性能与未来感的完美结合

Chevy Bolt EUV Custom Garage Door Opener

2024-05-05 08:58:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I found this small universal garage door opener on amazon and the internal circuit board just fits the opening to the right of the shifter in my Chevy Bolt EUV. Looks great filling the small cubby.

Here is the remote:

https://a.co/d/fentwAg

Instructions:

1) Print the case.
2) Remove the two screws on the back of the remote.
3) Remove the circuit board and the rubber buttons.
4) Using care, remove the small LED cover from the top of the remote shell and insert it into the top of the printed case.
5) Place the rubber buttons into the top of the printed case.
6) Snap the circuit board into the top of the printed case, taking care to align it properly and in the correct orientation.
7) Attach the bottom of the printed case using one of the screws removed in step 2.
8) Push it into the opening in the center console. It should fit snugly, but not too tight.